Product Specifications:
UPC Code: 873750004334
UPC Code: 873750004372
Manufacturer: Magpul Industries
Model: Generation 2
Model: MBUS
Type: Sight
Fit: Picatinny
Finish/Color: Olive Drab Green
Description: Front & Rear
Manufacturer Part #: MAG247-OD
Manufacturer Part #: MAG248-OD
Product Description:
MAG247-OD:
The MBUS (Magpul Back-Up Sight) is a low-cost, color injection molded, folding back-up sight.
The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the .223 platform.
Features
- Impact resistant polymer construction provides light weight and resists operational abuse
- Spring-loaded flip up sight easily activated from either side or by pressing the top
- Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
- Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard and provides the same height-over-bore as standard irons
- Protective wings shield the spring-locking front sight post
- Elevation adjustment tool included, but most aftermarket front sight adjustment tools may be used as well
Specifications
- MBUS Front Gen 2
- Weight, w/ hardware: 1.2 oz.
- Height above rail, stowed: ~0.51 in.
- Length, stowed: 2.6 in.
- Length, deployed: 1.5 in.
NOTE: Cannot be mounted to a railed gas block due to excess heat issues.
Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. Because of this the sight is also not compatible with MOE Hand Guards.
MAG248-OD:
The MBUS (Magpul Back-Up Sight) is a low-cost, color injection molded, folding back-up sight.
The dual aperture MBUS Rear Sight is adjustable for windage and fits most 1913 Picatinny rail equipped weapons, but is specifically tailored to the .223 platform. Made in U.S.A.
Features
- Impact resistant polymer construction provides light weight and resists operational abuse
- Spring-loaded flip up sight easily activated from either side or by pressing the top
- Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
- Clamps to MIL-STD-1913 Picatinny/STANAG 4694 receiver rail and provides the same height-over-bore as standard irons
- Protective wings shield the dual, same plane flip apertures
- Sight can still be folded with either large or small aperture in position
- Detent knob easily and positively adjusts windage
Specifications
- MBUS – Rear Gen 2
- Weight, w/ hardware: 1.3 oz.
- Height above rail, stowed: ~0.51 in.
- Center of aperture to top of rail: 1.42 in.
- Length, stowed: 2.6 in.
- Length, deployed: 1.5 in.
Made in U.S.A.
E.A.R.
Export Administration Regulations Controlled Product
